NarrowBand IoT

IoTThe Internet of Things (IoT) is on everybody’s mind and analysts expect billions of connected devices in the upcoming years. In order to meet the increasing demands of products for consumers and IoT solutions for companies and business customers, new standards for transferring data have to be determined.

(more…)

Frank Auer: Marketing Manager Print & Online

Band 28 : Mobile takes over Television broadcasting

band 28The mobile market continues to have spectacular growth figures and it is forecasted that upward trend continues throughout the next few years. Not only on a head count where we can safely say that over half of the world’s population has a mobile subscription, but also on the amount of SIM connections used for machine-to-machine (M2M), especially with the huge spread of IoT to date and even more so for the future.

It is within this context that new band plans are so important. However it is true to say that certain band plans hold very high expectations. This is the case of APT700 (700 MHz) band 28. APT700 was identified as a huge potential for the mobile market with the shift of television broadcasting from analogue to digital, leaving the 700 MHz frequency bands free for spectrum auctions. It was Australia and New Zealand who took the leading role in converting 700 MHz into bands for the cellular market. However, since then, many more countries have joined in and started to use this frequency band.

Currently, there are 12 operators who have launched APT700 band 28. Apart from Australia and New Zealand, other countries with band 28 operators are Taiwan and Papua New Guinea in the Asia Pacific region, as well as Panama in LATAM. Moreover, it is clear that Panama will not be the only LATAM country to take on 700MHz band 28 for the mobile market. There are also another 13 countries in LATAM who are committed to taking on 700MHz band 28 for LTE deployments. Within those, one of the countries is Mexico which has a huge potential with over 100 million inhabitants. Overall there are 43 countries with 700MHz currently launched or planned for LTE deployments, including Eurpoean countries such as Finland, France, Germany, Sweden, UK and United Arab Emirates in the Middle East.

But why the APT700 band 28 plan?

It has various clear advantages due to the low spectrum issues, which are briefly summarized below:

1.       Wide area coverage: Band 28 has an excellent wide area coverage and wider bandwidth availability, data capacity and higher performance. All these offer clear advantages for regional and rural environments.

2.       Reduced capital expenditure: Having an excellent wide area coverage, means that operators can reduce their capital expenditure, as they need less deployment of base stations per square kilometer of territory to spread the cellular network in low density areas. 

3.       In-building coverage: Unlike other frequency bands, APT700 band 28 is able to transmit much easier than other LTE frequency bands, through building walls and other obstacles.

4.       Economies of Scale on devices: To date many countries are committed to using APT700 band 28 and it is foreseen that more are going to join. This will increase the total amount of potential users, increase the productivity of devices, and hence bring economies of scale for devices.

5.       Roaming: Again the large number of countries gives another advantage in that it simplifies roaming around the world for LTE users.

6.       Machine-2-Machine applications: With 700 MHz band 28, whether devices are placed indoors or outdoors, the network can work extremely well. This makes it totally viable for machine-2-machine set-ups in general, as well as for the concept of Smart City solutions.     

Many of these advantages could be clearly expected from a frequency band that had been used for television broadcasting for many, many years. Seeing these advantages, Teldat was quick to investigate the 700MHz band 28 plan and we have been one of the first router manufacturers to work perfectly with band 28 in many of our transport and compact routers.

Javier García Berjano: Online & Corporate marketing manager at Teldat. Javier manages the web, blog and other social media, as well as corporate marketing areas in collaboration with the different Teldat business units.  

DMVPN vs Mobile IP

DMVPN vs Mobile IPNowadays, there are more and more applications running on a mobile environment such as, M2M, services for passengers, telemetering, etc… These applications often rely on several wireless access technologies (LTE, 3G, Wi-Fi, Satellite…) to implement the connectivity to the on-board network.

In these kind of scenarios, very often the WAN IP changes have an impact on the continuity of applications running at the central office or on the internet. Therefore, there have been several initiatives to provide continuous connectivity in scenarios where the WAN IP is dynamic. The most common ones use Mobile IP or a combination of standard protocols, which mix DMVPNs with dynamic routing.

Mobile IP

Mobile IP is an open standard that allows users to keep the same IP address, stay connected and maintain ongoing applications, while roaming between different IP networks. Hence ensuring that a roaming device could continue communication without sessions or connections being dropped.
mobile IP FDM

This standard is based on identifying each roaming device, (mobile node, MN) by its home address disregarding its current location in the Internet.  Away from its Home Network, a mobile node is associated with a care-of-address (CoA), which identifies its current location in the Foreign Network, and its home address is associated with the local endpoint of a tunnel to its Home Agent.

Mobile IP specifies how a mobile node registers with its home agent and how the home agent routes datagrams to the mobile node through the tunnel.

Due to this standard’s design, telecom carriers need to implement Mobile IP infrastructure inside their core network. Access network equipment (Foreign Agent, FA in the diagram) also need to implement the same standard and have the ability of build up the GRE tunnels. In scenarios where we use two different telecom carriers, the Home Agent should be implemented by a transversal service that is able to build the tunnels through both carriers’ networks.

For the above-mentioned reasons, deploying Mobile IP is complex.

DMVPN an alternative to Mobile IP

There are other safer tunnel-based technologies which allow changes on the WAN IP address. Using a VPN allows to configure connectivity between two LAN networks independently of the routing changes inside the network the tunnel is going through.

DMVPNs are the typical approach used to build a VPN between two devices with dynamic WAN IP and it is a much more mature technology and spread out than Mobile IP. Building a DMVPN requires a public fixed IP at the central side (HUB). While spokes could have dynamic or fixed public IPs.

mobile IP FDM2

Using a protocol named NHRP (Next Hop Resolution Protocol) the different Spokes can be registered into the HUB allowing to set up a VPN between two Spokes without going through the HUB.  Also, if a Spoke changes its WAN IP, it will send an update to the hub updating its new address.

As well as in Mobile IP, the convergence of the technology requires some time. In addition, the change of two cellular networks from different carriers (LTE module needs to reboot and re-register in the new network) also requires some time. However, in real mobile environments (such as in-vehicle connectivity) the change between carriers is not instantaneous (the coverage from one carrier gradually lowers while the coverage of the other cellular network is improving gradually).

The combination of a device with two cellular modules allow having two simultaneous cellular networks available to provide the service. In this case, each module will connect to each cellular network and build up two tunnels (one through each telecom carrier) which will coexist until the coverage of one of the carriers is much stronger than the other. Adding an appropriate dynamic routing protocol configured at both extremes of the tunnel with fast update features and different priorities in the exported routes, allow application continuity whenever any WAN link is down or quality is not sufficient.

mobile IP FDM3

DMVPN , an efficient solution that minimizes costs

Mobile IP requires additional infrastructure and a very complex deployment on the Telecom Carriers’ side. The solution based on DMVPNs is completely independent from the Telecom Carriers and does not require additional costs, as well as allowing to configure simultaneous connections through different Carriers without any difficulty. This is why Teldat deploys DMVPN technology for its mobile scenarios, whether on trains, buses or any other type of vehicles, via our routers H1-Rail, H2-Automotive or similar.

Fernando de Miguel: Fernando de Miguel, Engineer, is part  of Teldat’s R&D Department. Within this department he works as a Project Manager, specialised in Industrial and Mobility