SpanishEnglish

The Teldat Telecontrol+ Module allows you to control the power supply of remote devices. It is very useful for restarting critical machines (such as remote cash machines) when they are in a shutdown state or for controlling lights or mains-powered machines remotely. 

The Telecontrol+ Module (MTC+) is a peripheral device for a Teldat router, managed out of band since it only connects to the console port of said router. And because the device does not require an Ethernet connection, it does not consume infrastructure resources or require human intervention for implementation. Nor does it interfere with the network. 

The MTC+ uses the router's IP network resources, thus increasing device realiability. 

A single router can support up to 16 cascaded MTC+ modules. 

The MTC+ module is managed from the router, which in turn receives commands addressed to the MTC+, either via console or SNMP. 

  • Highly reliable
  • It does not include an operating system or IP layer, only the electronic control device, so it is immune to software failure and totally stable. 

  • No Ethernet or IP address required
  • It does not require switch ports. No need to reserve/administer an IP address. Works independently of the network, thus providing you with more security. 

  • Controls up to 16 devices per router
  • It is has an input control port and an output control port, to cascade MTC+ modules without taking up Ethernet/IP resources. 

  • Dual electromechanical switch
  • Relay-based systems generate internal sparks that end up burning the contacts. The MTC+ electronically cuts the current before the relay is tripped. 

    The Telecontrol+ Module (MTC+) is a device that connects to a Teldat router and receives control signals from a control station to control a device's power state. Suitable for critical electronic cystems that are susceptible to being blocked (such as cash machines and other control systems).

    Reliability plays a key role in this type of devices; for this reason, the MTC+ does not include an operating system, IP layer or Ethernet connection but instead uses the router's resources. In this way, 24/7 operation is guaranteed. 

    For greater reliability, it incorporates an electronic current control mechanism (in addition to the traditional mechanical mechanism) to prevent sparks in contacts and maximize useful life, even with more powerful and reactive loads. 

    It connects to the router through the console port. It supports multi-unit cascading (up to 16 devices). 


  • Improved reliability when downloading network tasks
  • It does not include an operating system or IP layer. It simply integrates the electrical control system. This makes it extremely reliable. 

  • No Ethernet connection required
  • In addition to the obvious savings in network Ethernet ports, it facilitates installation and increases reliability by becoming independent from the status of local network. 

  • Dual mechanical and electronic switching
  • Unlike other mechanical control devices (relays), the current is electronically cut off when it passes through zero without producing countercurrents or sparks, thus maximizing useful life and minimizing faults.

  • Multi-unit cascading(up to 16 devices)
  • Multiple serial devices can be managed via the control port without using additional Ethernet ports.

  • Compatible with 110/220 V and wordlwide sockts
  • The voltage setting is selected in the device itself and standard outlets are used with independent cables, allowing the device to be used all over the world.

  • Fully controllable by text or SNMP commands
  • The device receives commands sent to the reouter from a control center via console or SNMP, which means it can be integrated into automated systems. 

  • Supports high voltages and reactive loads
  • The design of the internal electronic control mechanism is such that it allows management of large, reactive power loads, making it especially useful in adverse environments.

  • HARDWARE TECHNICAL FEATURES

    • Control interfaces
    • One asynchronous port on an RJ11 input interface
    • One asynchronous port on an RJ45 input interface for cascading connections
    • Rotary selector
    • Permitted load
    • 1100w at 220v, 550w at 110v
    • 5 A protection fuse
    • Dimensions and weight
    • Length x Width x Height: 140 x 115 x 60 mm
    • Approximate weight: 0,350 Kg
    • Format: desktop
    • LEDs
    • 1 x power indicator LED
    • 1 x controlled output status indicator LED
    • Reset button
    • The reset button restores default settings

    SOFTWARE TECHNICAL FEATURES

    • Control procedure
    • Asynchronous communication between the router and cascade devices.
    • The router receives commands from the console or via SNMP
    • The router forwards the commands to the asynchronous interface

    ADDITIONAL TECHNICAL FEATURES

    Contact us
    X