Edge Network Computing

4G/LTE periperal device for corporate routers

Compatible 4G/LTE enabler for routers with no built-in wireless support

Product Highlights

  • Non-intrusive and compatible with other routers
  • Easy and quick installation
  • You can put the device anywhere in the office
  • You only need an Ethernet connection
  • PoE support
  • Standards-based
  • No management required

Introduction

Mobile connections are an ideal backup infrastructure for fixed connections. Unfortunately, however, corporate routers are not usually equipped to handle them, or are installed in poorly accessible locations and hence coverage is poor. Teldat-4Ge is the solution to this problem because it connects the corporate router to mobile networks easily, economically and non-intrusively. 


Teldat-4Ge integrates mobile connectivity and can be installed wherever there is adequate network coverage, using Ethernet to connect to the corporate router. 

Competitive Advantages

Quick and easy installation

No configuration required, just connect to Ethernet and it´s ready to go. If PoE is enabled, you only need the Ethernet cable; if not, you'll need to plug it.

No management required

The device uses auto provisioning to download the configuration (similar to an IP phone) from the office router.

The corporate router maintains control

The router controls the mobile connection, applying the same connection, security and QoS policies used for the fixed connection.

Discreet, unobtrusive design

To achieve maximum coverage, the device is usually placed somewhere on a wall inside the office where it can go unnoticed.

Description

Teldat-4Ge is the fastest, most effective and versatile solution for quality 3G/4G mobile connectivity.


Mobile networks are unquestionably the ideal backup connectivity solution where wired networks are unavailable. However, corporate routers are not usually prepared to handle a wireless connection or are housed in locations where mobile network coverage is lousy. Teldat-4Ge provides the solution to these problems. The device’s compact design makes it ideal for placing inside the office for optimum coverage and it connects to the corporate router via Ethernet.


The existing corporate router directly controls the mobile connection and integrates it with security, QoS and network management policies (Teldat-4Ge can operate as a standalone device).


With automatic provisioning and Power over Ethernet support, Teldat-4Ge can be efficiently and securely installed in just a few minutes, without requiring qualified personnel.

borrar

Ensuring connectivity for a corporation's office is essential. While redundant copper or fiber connections are useful, different fixed access methods often share the same infrastructure which means there is a chance they might fail at the same time. By contrast, mobile networks use air as a medium and a different infrastructure to fixed networks. This, together with the high level of efficiency of 4G networks in terms of latency and speed, make them the ideal backup system. 


Teldat-4Ge provides a non-intrusive way to enable mobile access in corporate routers that do not natively support mobile connections or that are installed in communications cabinets with poor coverage. Teldat-4Ge is a peripheral device that works with the router to secure and maintain control over the communications. It can operate as a standalone device. 

Key Features

Integrates mobile access into existing architecture

The router managing the fixed connections also controls the mobile connections and therefore applies the same security and QoS policies. 

Automatic provisioning

Teldat-4Ge does not store the configuration, rather it receives it via DHCP during start-up. This means that you do not need to do anything to the device before physically installing it.

Installation using a single cable

With Power over Ethernet support (a PoE injector is available for non-PoE switches) it can be powered simply using a single Ethernet cable making installation quick and easy.

Specifically designed to be placed inside the office

The device goes unnoticed in work/transit areas thanks to its compact size and elegant design.

Standards-based

A VLAN is used to set up the data connection between the router and Teldat-4Ge, creating what is, for all intents and purposes, a virtual interface on the router.

No management required

The device can be managed from the existing router, so you do not need to reserve an address for managing the device or register it on the management systems.

Tabletop to wall installation

Designed to be mounted on a wall to get the best signal strength.

Standalone router option

In "Router mode" it provides Ethernet devices with mobile connectivity for mobile offices or device backup.

Do you want to know more?

Download the product datasheet in PDF format. Always have access to the product characteristics, whether you are online or not. All the information stored in an easy to read 4-page format.

5G Network Resilience

Teldat provides the ultimate solution to provide automatic 5G WA.

 

LTE/4G Resilience & Failover

Main lines requires broadband and independent resilience and back up lines.

Telco with Resilience & Failover

Read our latest Blog Posts

The benefits of wireless connectivity

The benefits of wireless connectivity

The emergence of compact wireless routers promises to optimize the deployment of distributed locations for different sorts of businesses. As a result of developments in wireless technology, two widely used concepts appeared in the telecommunications sector related to...

read more
MTBF and hardware reliability

MTBF and hardware reliability

This year’s University Entrance Exam (EVAU) for physics in Madrid included a question on atomic decay..

The difficulty could lie not so much in physical concepts as in statistics, and with an equation as simple and seemingly innocent as the exponential: This equation

read more