• Cybersecurity Glossary
What is network microsegmentation and how is it implemented?
Network microsegmentation divides a network into small, isolated segments, often down to a single workload, and controls traffic between them with granular policies. Its main purpose is to stop lateral Movement, so a breach in one place cannot spread. Unlike traditional VLAN or subnet segmentation, modern microsegmentation can be based on Identity, applying policy to the workload or user wherever it sits. It is a core enabler of Zero Trust, is often integrated with NAC, and is deployed in Phases. This page explains the definition, identity based versus VLAN segmentation, NAC integration and how to implement it.
What microsegmentation is?
Network microsegmentation is a security technique that divides a network into small, isolated segments, often down to the level of an individual workload, application or device, and controls the traffic allowed between them with granular policies. Instead of one large, flat network where everything can talk to everything, the network becomes many small zones, each with its own rules.
The defining idea is granularity. Where older approaches divided a network into a few broad zones, microsegmentation goes much finer, controlling communication at the level of the workload itself. By default nothing is allowed unless it is explicitly permitted, so each segment only accepts the specific traffic it should.
This makes microsegmentation one of the most practical ways to apply Zero Trust inside a network. Rather than trusting everything already inside the perimeter, it assumes a threat could be anywhere and limits what each part can reach. The rest of this page explains why that matters, how identity based microsegmentation differs from traditional VLANs, how it works with network access control, and how to implement it.
Why it matters? stopping lateral movement
The single biggest reason to microsegment a network is to stop lateral movement, the way attackers spread once they are inside. Understanding this makes the value of microsegmentation clear.
Identity based vs VLAN segmentation
Segmentation is not new, but microsegmentation changes both how fine it is and what it is based on. The clearest way to understand it is to compare traditional VLAN or subnet segmentation with modern identity based microsegmentation.
| Aspect | VLAN / subnet segmentation | Identity based microsegmentation |
|---|---|---|
| Basis of policy | Network location and address | Identity of workload, app or user |
| Granularity | Broad zones | Down to a single workload |
| Movement within a zone | Often unrestricted inside the VLAN | Controlled between every workload |
| Policy follows the workload | No, tied to location | Yes, moves with the workload |
The key shift: VLAN segmentation separates by where something sits on the network, in broad strokes, and still allows fairly free movement inside each zone. Identity based microsegmentation separates by what something is, in fine detail, and the policy travels with the workload wherever it goes. That shift from location to identity is what makes microsegmentation so much more effective at stopping lateral movement.
NAC integration across vendors
Microsegmentation depends on knowing what every device and user is, and that is exactly what network access control provides. The two work best together, especially across the mixed equipment most organizations actually run.
Network access control, or NAC, decides which devices and users are allowed onto the network and under what conditions, identifying and classifying everything that connects. When NAC is integrated with microsegmentation, a device that joins the network is identified and automatically placed under the right segment policy, so segmentation is applied consistently and automatically rather than by hand.
In the real world, networks contain equipment from many vendors, accumulated over years. A microsegmentation approach that offers multi vendor NAC integration, working across the existing estate rather than requiring a single vendor’s kit everywhere, is far more practical. It lets an organization apply consistent, identity aware segmentation over the network it already has, which is often the difference between a plan that can be deployed and one that stays on paper.
How to implement it in phases?
Microsegmentation is best deployed step by step, not in a single change. A phased approach delivers protection steadily while avoiding disruption to legitimate traffic. These are the typical phases.
Microsegmentation and Teldat
Microsegmentation draws on segmentation, granular policy, visibility and Zero Trust, all areas at the heart of a network manufacturer’s portfolio. Teldat approaches it through SD-WAN and security, from a European base.
Segmentation for the network you have: microsegmentation works best when it fits the real, multi vendor network and can be rolled out in phases. Teldat combines SD-WAN segmentation, identity aware Zero Trust policy, be.OT for operational technology and central management through CNM, from a European base, to make that practical. Specific suitability should always be verified for each environment.
Frequently asked questions about microsegmentation
❯ What is network microsegmentation?
Network microsegmentation is a security technique that divides a network into small, isolated segments, often down to a single workload, application or device, and tightly controls the traffic allowed between them. Its main goal is to stop lateral movement: if an attacker or malware gets into one part of the network, microsegmentation stops them from moving sideways to reach other systems. Each segment has its own granular policy defining exactly what may communicate with it, so by default nothing is allowed unless explicitly permitted. This makes microsegmentation a practical way to apply Zero Trust inside the network, containing threats to a small area instead of letting them spread across the whole environment.
❯ How is microsegmentation different from VLAN segmentation?
Traditional segmentation with VLANs or subnets divides a network into fairly large zones based on network location, grouping devices that sit in the same place. It is coarse: once inside a VLAN, a device can often talk freely to others in the same zone, which still allows lateral movement within it. Microsegmentation is far more granular, isolating down to individual workloads, and modern approaches base policy on identity, the identity of the workload, application or user, rather than on where it connects. This means a policy follows the workload wherever it is, and communication is controlled at a much finer level. In short, VLAN segmentation separates by location in broad strokes, while identity based microsegmentation separates by identity in fine detail.
❯ What role does NAC play in microsegmentation?
Network access control, or NAC, decides which devices and users are allowed onto the network and under what conditions, identifying and classifying everything that connects. This makes NAC a natural partner for microsegmentation, because effective microsegmentation depends on knowing what each device and user is in order to apply the right policy. Integrating NAC with microsegmentation means that as a device joins the network it is identified and automatically placed under the appropriate segment policy. Because environments usually contain equipment from many vendors, a multi vendor NAC integration that works across the existing estate is valuable, letting an organization apply consistent microsegmentation without replacing everything it already has.
❯ How is microsegmentation implemented?
Microsegmentation is best implemented in phases rather than all at once. The first phase is visibility: mapping the network to understand what devices, applications and flows exist, since you cannot segment what you cannot see. The second phase is designing the policy: deciding which segments should exist and what is allowed to communicate, ideally on a default deny basis where only explicitly permitted traffic passes. The third phase is enforcement, applied gradually, often starting in a monitoring mode to check that legitimate traffic is not blocked before policies are fully enforced. The final phase is ongoing monitoring and refinement, adjusting policies as the environment changes. This phased approach lets an organization gain protection steadily without disrupting operations.
❯ How does Teldat support network microsegmentation?
Teldat approaches microsegmentation as part of its networking and security portfolio, built around SD-WAN and Zero Trust. Teldat SD-WAN, managed through the CNM platform, segments traffic across the network and applies granular policy, providing the enforcement layer that microsegmentation needs, while central management gives the visibility to design and refine segments. be.OT extends segmentation and Zero Trust to operational technology, and be.Safe adds network security and inspection. Because organizations run multi vendor environments, Teldat’s approach fits alongside existing equipment and network access control rather than requiring a full replacement, and its phased, identity aware model helps organizations move from visibility to enforcement in a controlled way. As a European manufacturer, Teldat also supports sovereignty goals. Specific suitability should always be verified for each environment.
Segment your network, contain the threat
Microsegmentation stops lateral movement by isolating workloads and controlling every flow. Teldat combines SD-WAN segmentation, identity aware Zero Trust policy and CNM management, built to fit multi vendor networks and manufactured in Europe under European jurisdiction.

